| Materials | |||
| Part | Ordinary Material | ||
| Finish | Specification | ||
| Graphic Overlay | PC(polycarbonate) | Gloss | 0.175/.25/.35/.5 mm thickness |
| Matt | 0.175/.25/.35/.5 mm thickness | ||
| PET (polyester) | Fine Texture | 0.15/.20 mm thickness (Autotex F150/F200, imported) | |
| Velvet Texture | 0.15/.20 mm thickness (Autotex V150/V200, imported) | ||
| Gloss with Hard Coat | 0.18 mm thickness | ||
| Top Adhesive | PET Double-sided adhesive | 0.10/.22/.28 mm thickness | |
| Paper Double-sided Tape | 0.10 mm thickness | ||
| Transfer Tape | 0.06/.12 mm thickness | ||
| Retainer | PET | Gloss | 0.125 mm thickness |
| Spacer | PET Double-sided Tape | 0.225/.275 mm thickness | |
| Circuit Layer | PET | Gloss | 0.1/.125 mm thickness |
| Rear Adhesive | Paper Double-sided Tape | 0.10 mm thickness (3M9080A) |
|
| Transfer Tape | 0.06/.12 mm thickness (3M467/3M468) | ||
| Connector | Pin | Metal,Male/Female 2.54mm | |
| House | Female,2.54mm | ||
| Silver Paste | Acheson ELECTRODA 820B | ||
| Carbon Paste | Acheson ELECTRODA 423SS | ||
| Insulation Ink | Acheson ELECTRODA 452SS | ||
|
Wire Resistance |
0.5mm width,<1Ω/cm |
Rated Current |
25-150mA,0-30V DC |
|
Insulation Resistance |
>100MΩ 250V DC |
Working Voltage |
<50V DC |
|
Working Life |
>1 million times |
Working Temperature |
-20℃-35℃ |
|
Working Humidity |
40℃,90%RH No Influence |
Feed BackTime |
10ms |
