Capacitive Touch Transparent Switch Membrane Sensor

Material: PET/PC/PVC
Size:Customized Size Accepted
Certification:ISO9001:2008 /ROHS/SGS
Payment terms:T/T,West Union,Paypal
Shipping by: UPS/ Fedex /DHL /TNT or Other Ways Specified
Delivery time: 12~15 Working Days
►Product name:  Capacitive Touch Transparent Switch Membrane Sensor

►Keyword:  membrane senor,capacitive touch membrane sensor,touch sensor,transparent membrane sensor

►Product photos

►Electrical performance 
Item Parameter Remarks
Working  voltage   ≤6.5V  
Working current ≤1mA  
Wire resistance       ≤50Ω The starting point for the Guard wire measurement is 1.0 mm from the edge of the carbon slurry and the end point is the end of the guard wire.
The starting points of the remaining wires were measured at a silver paste 1.0 mm from the edge of the carbon slurry, and the end points were at the opposite corners of the respective touch keypad.
Insulation resistance    ≥100MΩ The insulation resistance between any two wires should be greater than 100MΩ.
Select two connector terminals to be measured at the measurement point.
The test voltage is 10 VDC.
Reference standard GB 5095.2 test
Contact resistance ≤100mΩ The contact resistance of the terminals and connectors as well as the terminals and the silver paste should be measured.
Withstand Voltage     250VAC 1min No breakdown or arcing.
The withstand voltage between any two wires should be measured.

Working and storage environments
Working temperature: -20℃~+65℃;RH<90% 
Storage humidity:
Compliant with Rohs and Reach instructions.

►Other characteristics
Item Value (conditions) Remark
Light Transmission ≥80% Transmittance tester 
ASTM D-1003
Haze ≤3%(PET) Transmittance tester 
ASTM D-1003