Specification：
| Graphic overlay | Autotex F200 |
| Top adhesive | Crown PET adhesive 0.1mm |
| Retainer | PET foil 0.10mm |
| Metal dome | 12mm , 280g |
| Spacer | PET adhesive 0.28mm |
| Bottom circuit | PET foil 0.125mm |
| Rear adhesive | 3M 9080A |
| LED light | |
| Silver past | Acheson Electroda 820B |
| Carbon past | Acheson Electroda 423SS |
| Insulation Ink | Acheson Electroda 452SS |
Electrical Performances
| Wire Resistance | 0.5mm width, ≤1Ω/cm | Rated Current | 25-100mA,0-30V DC |
| Insulation Resistance | >100MΩ 250V DC | Working Voltage | <50V DC |
| Working Life | >500k times | Working Temperature | -30℃ ~ 70℃ |
| Working Humidity | 40℃, 98%RH | Withstand Voltage | 1500V DC |
| Feedback Time | 10ms | Tail Folding | R>1,180 |
